
Industrial Maintenance Requirements
Courses
- BRX 120 Basic Blueprint Reading
- CMM 110 Fundamentals of Machine Tools
- COM 181 Basic Public Speaking or COM 252 Introduction to Interpersonal Communication
- Digital Literacy - CIT 105 Introduction to Computers or OST 105 Introduction to
Office Systems (or Competency demonstrated by exam) - EET 270 Electrical Motor Control I
- EET 271 Electrical Motor Control I Lab
- EET 272 Electrical Motor Controls II
- EET 273 Electrical Motor Controls II Lab
- EET 276 Programmable Logic Controllers I
- EET 277 Programmable Logic Controllers I Lab
- ENG 101 Writing I
- FPX 100 Fluid Power
- FPX 101 Fluid Power Lab
- Heritage or Humanities General Education course
- IMT 100 Welding for Maintenance
- IMT 101 Welding for Maintenance Lab
- IMT110 Industrial Maintenance Electrical Principles
- IMT 111 Industrial Maintenance Electrical Principles lab
- IMT 1381 Safety Culture
- IMT 1382 5S
- IMT 1383 Total Production System Maintenance
- IMT 1384 Problem Solving
- IMT 1385 Maintenance Reliability
- IMT 150 Maintaining Industrial Equipment I
- IMT 151 Maintaining Industrial Equipment I Lab
- IMT 200 Industrial Robotics and Robotic Maintenance
- IMT 289 Capstone
- MAT 116 Technical Mathematics (or higher level Quantitative Reasoning course
- Natural Science General Education course (rec. PHY151 Introductory Physics)
- Social/Behavioral Science General Education course (rec. COM 254 Introduction to Intercultural Communication)
Notes
- * Other courses substituted at the discretion of the program coordinator.
- Progression in the program is contingent upon achievement of a grade of C or greater
in each
technical course, (including those selected as technical electives), and maintenance of a 2.0
cumulative GPA or above (on a 4.0 scale). - At least 25 percent of the approved curriculum for any certificate, diploma or degree
must be
completed at the student’s home college.
Updated 7/26/21
Courses
- BRX 110 Basic Blueprint Reading for Machinist
- or BRX 120 Basic Blueprint Reading
- Digital Literacy - CIT 105 Introduction to Computers or OST 105 Introduction to Office Systems (or Competency demonstrated by exam)
- EET 270 Electrical Motor Control I
- EET 271 Electrical Motor Control I Lab
- EET 276 Programmable Logic Controllers I
- EET 277 Programmable Logic Controllers I Lab
- ELT 110 Circuits I
- ENG 101 Writing I
- FPX 100 Fluid Power
- FPX 101 Fluid Power Lab
- Heritage or Humanities General Education course
- IMT 150 Maintaining Industrial Equipment I
- IMT 151 Maintaining Industrial Equipment I Lab
- IMT 289 Capstone
- MAT 116 Technical Mathematics (or higher level Quantitative Reasoning course)
- Natural Science General Education course
- Oral Communications General Education course
- Social/ Behavioral Science General Education course
- Technical Elective *
- WLD 152 General Welding
- or WLD 120/121 Shielded Metal Arc Welding and Lab
- or IMT 100/101 Welding for Maintenance and Lab
Notes
- * Other courses substituted at the discretion of the program coordinator.
- Progression in the program is contingent upon achievement of a grade of C or greater
in each
technical course, (including those selected as technical electives), and maintenance of a 2.0
cumulative GPA or above (on a 4.0 scale). - At least 25 percent of the approved curriculum for any certificate, diploma or degree
must be
completed at the student’s home college.
Updated 7/26/21
Courses
- BRX 110 Basic Blueprint Reading for Machinist
- or BRX 120 Basic Blueprint Reading
- Digital Literacy - CIT 105 Introduction to Computers or OST 105 Introduction to Office Systems (or Competency demonstrated by exam)
- EET 270 Electrical Motor Controls I (pre-req ELT 110)
- EET 271 Electrical Motor Control I Lab (pre-req ELT 110)
- EET 276 Programmable Logic Controllers I
- EET 277 Programmable Logic Controllers I Lab
- ELT 110 Circuits 1
- FPX 100 Fluid Power
- FPX 101 Fluid Power Lab
- General Education Area 1 – Written or Oral Communication or Heritage/Humanities
- IMT 150 Maintaining Industrial Equipment I
- IMT 151 Maintaining Industrial Equipment I Lab
- IMT 289 Capstone
- MAT 116 Technical Mathematics (or higher level Quantitative Reasoning course)
- Technical Elective * (rec. CMM 110 Fundamentals of Machine Tools A)
- Technical Elective * (rec. CMM 112 Fundamentals of Machine Tools B)
- Technical Electives* (7 credit hours)
- WLD 152 General Welding
- or WLD 120/121 Shielded Metal Arc Welding and Lab
- or IMT 100/101 Welding for Maintenance and Lab
Notes
- * Other courses substituted at the discretion of the program coordinator (15 credit hours technical electives required).
- Progression in the program is contingent upon achievement of a grade of C or greater in each technical course, (including those selected as technical electives), and maintenance of a 2.0 cumulative GPA or above (on a 4.0 scale).
- At least 25 percent of the approved curriculum for any certificate, diploma or degree must be completed at the student’s home college.
Updated 7/26/21
Courses
- EET 270 Electrical Motor Control I
- EET 271 Electrical Motor Control I Lab
- or EET 264 Rotating Machinery and EET265 Rotating Machinery lab
- ELT 110 Circuits I
- FPX 100 Fluid Power
- FPX 101 Fluid Power Lab
Notes
- Progression in the program is contingent upon achievement of a grade of C or greater in each technical course, (including those selected as technical electives), and maintenance of a 2.0 cumulative GPA or above (on a 4.0 scale).
- At least 25 percent of the approved curriculum for any certificate, diploma or degree must be completed at the student’s home college.
Updated 7/26/21
Courses
- BRX 110 Basic Blueprint Reading for Machinist
- or BRX 120 Basic Blueprint Reading
- CMM 110 Fundamentals of Machine Tools A
- CMM 112 Fundamentals of Machine Tools B
- IMT 150 Maintaining Industrial Equipment
- IMT 151 Maintaining Industrial Equipment Lab
- WLD 152 General Welding
- or WLD 120 Shielded Metal Arc Welding and WLD 121 Shielded Metal Arc Welding Lab
- or WLD 140 Gas Metal Arc Welding and WLD 141 Gas Metal Arc Welding Lab
Notes
- Progression in the program is contingent upon achievement of a grade of C or greater in each technical course, (including those selected as technical electives), and maintenance of a 2.0 cumulative GPA or above (on a 4.0 scale).
- At least 25 percent of the approved curriculum for any certificate, diploma or degree must be completed at the student’s home college.
Updated 1/27/20
Courses
- ELT 110 Circuits I
- FPX 100 Fluid Power
- FPX 101 Fluid Power Lab
- IMT 150 Maintaining Industrial Equipment I
- IMT 151 Maintaining Industrial Equipment I Lab
Notes
- Progression in the program is contingent upon achievement of a grade of C or greater in each technical course, (including those selected as technical electives), and maintenance of a 2.0 cumulative GPA or above (on a 4.0 scale).
- At least 25 percent of the approved curriculum for any certificate, diploma or degree must be completed at the student’s home college.
Updated 1/27/20
Courses
- BRX 110 Basic Blueprint Reading for Machinist
- or BRX 120 Basic Blueprint Reading
- CMM 110 Fundamentals of Machine Tools A
- CMM 112 Fundamentals of Machine Tools B
- ELT 110 Circuits I
- FPX 100 Fluid Power
- FPX 101 Fluid Power Lab
- WLD 152 General Welding
- or WLD 120 Shielded Metal Arc Welding and WLD 121 Shielded Metal Arc Welding Lab
- or WLD 140 Gas Metal Arc Welding and WLD 141 Gas Metal Arc Welding Lab
Notes
- Progression in the program is contingent upon achievement of a grade of C or greater in each technical course, (including those selected as technical electives), and maintenance of a 2.0 cumulative GPA or above (on a 4.0 scale).
- At least 25 percent of the approved curriculum for any certificate, diploma or degree must be completed at the student’s home college.
Updated 1/27/20
Courses
- EET 270 Electrical Motor Control I
- EET 271 Electrical Motor Control I Lab
- EET 276 Programmable Logic Controllers I
- EET 277 Programmable Logic Controllers I Lab
- ELT 110 Circuits I
- FPX 100 Fluid Power
- FPX 101 Fluid Power Lab
- IMT 150 Maintaining Industrial Equipment I
- IMT 151 Maintaining Industrial Equipment I Lab
- IMT 200 Industrial Robotic and Robotics Maintenance
- or ELT 260 Robotics and Industrial Automation
Notes
- Progression in the program is contingent upon achievement of a grade of C or greater in each technical course, (including those selected as technical electives), and maintenance of a 2.0 cumulative GPA or above (on a 4.0 scale).
- At least 25 percent of the approved curriculum for any certificate, diploma or degree must be completed at the student’s home college.
Updated 7/26/21